• Phone: 65 6272 9828
Tanks
EGT ISO TANKS
We Use State Of The Art ISO Tanks Built For Excellence

Our tanks are designed and manufactured by the industry’s leading manufacturer, who is also certified by a top Classification Society. Therefore, the quality of Eagletainer ISO tanks can be assured and meet ISO standards.

  • TANK TYPE

    20ft ISO UN Full Frame Tank

  • CAPACITY

    25,000 litres

  • MAX GROSS

    36,000 kg

  • PRODUCTS

    General purpose liquids

  • MAWP

    4 bar

  • TEST PRESSURE

    6 bar

  • VESSEL DESIGN TEMP

    -20 dec C to 120 Deg C

  • TYPE APPROVALS

    UN portable tank (T11 IMDG, CFR49, ADR/RID), UIC, TIR, CSC, TC)

  • DESIGN CODE

    ASME VIII Div 1 where applicable.

  • MATERIAL

    Shell Material: Stainless Steel 316L

    Manufacture Thickness: 4.6mm

    The equivalent thickness in mild steel: 6mm

    Ends Material: Stainless Steel 316L

    The equivalent thickness in mild steel: 6mm

    Thickness: 4.5mm

  • TYPE

    ISO 1496/3 (1CC) without saddles.

  • WALKWAY

    475mm wide non-slip marine resistant grade aluminium.

    Two full longitudinal length sections set at boths side of tank.

    Three transverse walkways fitted – two at both end frame, one behind the manlid spill box.

  • LADDER

    Rear right hand side and stainless steel anti slip rungs.

  • SAFETY RELIEF VALVE

    1 x 2½" screw type pressure only valve set at 4.4 bar

  • MANLID

    500mm dia. hinged 8 point manlid

  • AIRLINE

    1.5" BSP ball valve

  • TOP OUTLET PROVISION

    3" low profile tank pad complete with blank flange.

  • BOTTOM OUTLET

    3" 45 degree highlift footvalve

    3" clamped butterfly valve

    3" BSP outlet connection

    3" BSP stainless steel dustcap

    Footvalve complete with remote closure system

  • STEAM HEATING

    Effective heating area ranges from 7.5 sqm to 12.2 sqm.

    1" BSP inlet, 3/4" BSP outlet.

  • DOCUMENT HOLDER

    Φ75 × 325mm Plastic document holder fitted to rear end frame.

  • THERMOMETER

    Glycerin filled Analogue thermometer

  • INSULATION

    50mm thickness Rockwool

  • CLADDING

    Barrel: 1.8mm thick white glass reinforced plastic

    Ends: 2.0mm thick white glass reinforced plastic